业务专线：
0756-337 1617
0756-337 1717
微信：139 2809 1526
微信：139 2809 1528
QQ:377193215
技术支持：
0756-3371717
公司地址：广东珠海吉大工业区景园路10号德光大厦
工厂地址：广东珠海南屏工业园区屏西七路9号工业楼
各国插头标准尺寸
2PIN欧洲插脚
Two-pin plugs for class II appliances (Up to 2.5 A rating)
According to EN50075 - Standard Sheet and IEC60083 - Standard C5
| Symbol | Requirement (mm) | Measured (mm) | | Symbol | Requirement (mm) | Measured (mm) |
| A | ³ 16.5 | | | I | ¾ | |
| B | 25.6 - 26.6 | | | J | 3.94 – 4.06 | |
| C | 45 ° | | | K | 10.0 – 11.0 | |
| D | R 5.0 – 6.0 | | | L | 18.5 – 19.5 | |
| E | 34.6 – 36.0 | | | M | £ 90 ° | |
| F | 13.0 – 14.4 | | | N | 0.7 – 1.7 | |
| G | Engagement 18.0 – 19.2 | | | O | £ 2.0 | |
| G | End 17.0 – 18.0 | | | P | ³ 4.0 | |
| H | Within 4 mm from engagement face£ 4.0mm | | | Q | ³ 18.0 | |
| Above 4 mm from engagement face£ 3.8mm | |
A & P only for plug with supply cord. Direct plug-in product not consider the dimensions.
英国插脚
UK Plug Checking Form according to Figure 4 of BS1363-3
Grounding pin
| Symbol | Requirement (mm) | Measured (mm) | | Symbol | Requirement (mm) | Measured (mm) |
| A | 25.37 max. | | Q | 17.2-18.2 | | |
| B | 25.37 max. | | R | 6.22-6.48 | / | |
| C | 34.6 max. | | S | 3.90-4.05 | | |
| D | 11.05-11.18 | | T | 6.22-6.48 | / | |
| E | 11.05-11.18 | | U | 6.35 min. | | |
| F | R 15 min. | -- | V | 60°-80° | -- | |
| G | R 9.5 min. | | W | 1.35-1.85 | | |
| H | R 9.5 min. | | X | 3.90-4.05 | | |
| I | 22.10-22.36 | | Y | 1.2-2.0 | | |
| J | 22.23-23.23 | | Z | R 0.1-1.0 | -- | |
| K | 1.35-1.85 | | a | 58°-62° | -- | |
| L | 7.80-8.05 | | b | 1.35-1.85 | | |
| M | 58°-62° | -- | c | 58°-62° | -- | |
| N | 3.90-4.05 | / | d | 1.35-1.85 | | |
| O | 9.2 max. | | e | 0.2 max. | | |
| P | 9.5 max. | | f | 1.35-1.85 | |
澳规插脚
| Standard sheet Figure 2.1 (a1) or 2.1(c) | Standard sheet Figure 2.1 (e) and fig 2.4 | ||
| Position | Required (mm) | By Measurement (mm) | By the gauges in Figure A1 |
| A | 6.35±0.15 | | - |
| B | 6.35±0.15 | | |
| C | | | - |
| D | 7.92 | -- | P |
| E | 10.31 | -- | P |
| F | 17.06±0.4 | | - |
| G | 19.94±0.8 | | |
| 1 | 21.9 max. or 27.0 min. | | - |
| 2 | 21.9 max. or 27.0 min. | | - |
| 3 | 21.9 max. or 27.0 min. | | - |
| 4 | 21.9 max. or 27.0 min. | | - |
| 5 | 60° | -- | P |
| 6 | 60° | -- | P |
| 7 | 8.6 min. | | - |
| 8 | 21.0 max. | | - |
| 9 | 20.0±1.0 | | - |
| 10 | 1.0 max | | - |
| 11 | 8.7±0.5 | | - |
| Dimensions checked by gauge and measurement | |||
| Standard sheet Figure 2.1 | |||
| Position | Required (mm) | By Measurement (mm) | By the gauges in Figure A1 |
| Plug type (h) | |||
| R | 0.35±0.05 | | - |
| S | 0.9±0.1 | | - |
| T | ≥0.60 | | - |
| V | 6 | -- | P |
美国插脚
Dimension Checking for Two-pin plugs of NA (15 A, 125 V)
According to (NEMA WD 6-2002 Figure 1-15)
| Symbol | Requirement (inch) | Measured (inch) | | Symbol | Requirement (inch) | Measured (inch) |
| A | 0.120 - 0.130 | | | E | 0.240 - 0.260 | |
| B | 0.151- 0.161 | | | F | 0.307 - 0.322 | |
| C | 0.449 - 0.479 | | | G | 0.055 - 0.065 | |
| D | 0.625 - 0.718 | | | H | 0.495 - 0.505 | |
| Perimeter faces to the plug blades shall not be less than 7.9 mm (intended for use with children’s toys) or 5.1 mm from any point of either blade | | |||||
中国插脚
Dimension Checking for Tow-pin plugs (6 A, 10 A rating)
According to Fig 1 of GB 1002-2008
d
| Symbol | Requirement (mm) | Measured (mm) |
| t | 1.40 ~ 1.50 | |
| b | 6.18 ~ 6.40 | |
| F | 12.565 ~ 12.835 | |
| E | 15.65 ~ 16.35 | |
| R | 5.00 ~ 7.00 | |
| d This distance of live plug to engage edge | ≥ 6.5 | |
台湾插脚
韩国插脚
Dimension Checking for Korea plugs (Two-pole plug for 3A 250V)
According to KSC 8305
Symbol | Requirement (mm) | Measured (mm) | Symbol | Requirement (mm) | Measured (mm) |
A | Max. 90° | | Q | 3.3 ~ 4.3 | |
B | Max. 3 | | R | Min. 6 | |
C | Max. f 2.5 | | S | 25.6 ~ 26.6 | |
D | f 36.0 ~ f 37.0 | | T | 13.0 ~ 14.4 | |
E | 18.8 ~ 19.2 | | U | 18.8 ~ 19.2 | |
F | R3.0 ~ R3.3 | | V | 34.6 ~ 36.0 | |
G | 3.5 ~ 4.5 | | W | R5 ~ R6 | |
H | Min. 5 | | X | 45° | |
I | 31.5 ~ 32.5 | | Y | Min. 4 | |
J | 9.9 ~ 10.1 | | Z | 4 | |
K | 9.9 ~ 10.1 | | A1 | 10.0 ~ 11.0 | |
L | Min. 16.5 | | B1 | 18.5 ~ 19.5 | |
M | Min. 17.5 | | C1 | f 4.74 ~ f 4.86 | |
N | 18.5 ~ 19.5 | | D1 | Max. 4.3 | |
O | Min. 15.5 | | E1 | 4.4 ~ 4.8 | |
P | f 4.74 ~ f 4.86 | | | | |
日本插脚
| Dimensions checked by gauge and measurement | |||
| | Position | Required (mm) | By Measurement (mm) |
| A | <14.6 | | |
| B | >10.8 | | |
| C | 1.35 – 1.65 | | |
| D | 1.35 – 1.65 | | |
| E | -- | -- | |
| F | -- | -- | |
| G | 6.0 – 6.6 | | |
| H | 6.0 – 6.6 | | |
| I | -- | -- | |
| J | -- | -- | |
| K | 15.7 – 18.3 | | |
| L | 15.7 – 18.3 | | |
| M | -- | -- | |
| N | -- | -- | |
| O | -- | -- | |
| P | 11.3 – 12.1 | | |
| Q | 11.3 – 12.1 | | |
| R | φ2.8 –φ3.3 | | |
| S | >φ3.5 | | |
| T | <0.9 | | |
| | | | |
| | | | |
| | | | |
巴西插脚
Equipment’s combined with two-pole plug (Class II) 10 A/250V a.c. (figure 13. NBR 14136: 2002)
| Symbol | Requirement (mm) | Measured (mm) | Symbol | Requirement (mm) | Measured (mm) | |
| B | 25.5 - 26.5 | | | J | 3.95 – 4.05 | |
| C | 90 ° - 92 ° | | | K | 10.0 – 11.0 | |
| D | R 5.0 – 6.0 | | | L | 19.0 – 19.7 | |
| E | 35.0 – 36.0 | | | N | 1.0 max. | |
| F | 13.0 – 14.4 | | | O | R 2.0 -2.5 | |
| G | 18.8 – 19.2 | | | ④ | > 3 mm | |
| ① | > 14 mm | | | ⑤ | See above | |
| ② | See above | | | ⑥ | See above | |
| ③ | See above | | | ⑦ | See above | |
Note:
1 The sketches are not intended to govern design, except as regards the dimensions shown
2 Plugs can be rewirable or non-rewirable
Requirements:
① – The distance between the engagement face and the cord or cord guard, if any, shall be at least 14 mm
② – Within this distance, the outline shall be not smaller than the engagement face.
③ – Within this distance, the outline shall be not larger than the engagement face.
④ – Insulating sleeves on the current-carrying pins are optional If the insulating sleeves are separate parts, they shall enter the plug by at least 3mm measured from the engagement face.
⑤ – The external diameter of the insulating sleeves shall not be larger than the diameter of the uninsulated part of the pins.
⑥ – To avoid damage to shutters, the ends of the pins shall show neither sharp edges nor burrs. They shall be of rounded shape as shown.
⑦ – The angle of 90° represents the maximum permissible area for the orientation of the entry of the flexible cable or cord.
印度插脚：
Indian Plug Checking Worksheet
Dimension: mm
| Symbol | Rated Current | Measured | |
| ( ) 6A | ( ) 16A | ||
| A | 22.22±0.15 | 28.6±0.15 | |
| B | 19.1±0.15 | 25.4±0.15 | |
| C | 7.010-7.085 | 8.660-8.735 | |
| D | 5.030-5.105 | 7.010-7.085 | |
| E | 15.77-16.94 | 20.47-21.64 | |
| F | 20.47-21.64 | 28.47-29.64 | |
| G1) | ≥7.94 | ≥9.52 | |
Note:
1. “G” is the minimum distance between the pins and the periphery of the plug.
阿根廷插脚：
IRAM 2063 Plug (Class II, two-pole) Checking Worksheet
（IRAM 2063：1982 + Amd 1999）
| Symbol | Requirement (mm) | Measured (mm) | | Symbol | Requirement (mm) | Measured (mm) |
| A | 8.0 min. | | | H | 120±5° | |
| B | 7.92±0.1 | | | I | 13.72±0.1 | |
| C | 7.92±0.1 | | | J | 6.25±0.1 | |
| D | 6.86±0.1 | | | K | 6.25±0.1 | |
| E | 6.86±0.1 | | | L | 1.55±0.07 | |
| F | 60° | | | M | 18.2±0.2 | |
| G | 60° | | | N | Marked “N” | Yes / No |
沙特插脚：
SASO Plug Checking Form according to Figure 1 of SASO 2203
| Symbol | Requirement (mm) | Measured (mm) | | Symbol | Requirement (mm) | Measured (mm) |
| A | -- | | K | 1.57 | | |
| B | 50.8 max. | | L | 1.57 | | |
| C | 32.5 max. | | M | 17.2 – 18.2 | | |
| D | 11.1 | | N | 22.2-23.2 | | |
| E | 11.1 | | O | 3.89 － 4.05 | | |
| F | R 15 min. | Check by gauge | P | 1.57 | | |
| G | 3.89 － 4.05 | | Q | 3.89 － 4.05 | | |
| H | 6.22 － 6.48 | | R | R 9.5 min | | |
| I | 6.22 － 6.48 | | S | R 9.5 min | | |
| J | 1.57 | | | | |
